Give Thanks Pumpkin

Give Thanks Pumpkin

0 out of 5

$2.99$11.99

Give Thanks Pumpkin is available as a full kit (add your own string, thread or jute) to create 3D banners! Sizes are laser cut in several widths. Unfinished, in your choice of material.

Clear

View cart
View cart

Description

Give Thanks Pumpkin is available as a full kit (add your own string, thread or jute) to create 3D banners! Sizes are laser cut in several widths. Unfinished, in your choice of material.

Available material:

  • MDF is (relatively) inexpensive and fairly easy to paint. Though you may find it to be quite thirsty on the first coat. Priming is recommended.
  • Rev Ply is 5 mm plywood. Rounds stain beautifully, although with a very straight grain. Read more about it here.
  • 1/8 inch Russian Birch plywood is a very thin plywood, with a more “normal,” wavy wood grain. You will recognize that anything with “Russian” in the name these days is getting VERY expensive. But we have it available (for now)!
  • 1/4 inch Birch is used by a lot of folks. Grain may rise slightly and need sanding between coats of paint. Birch plywood often contains “voids”–holes in the middle of the wood, that are covered on both front and back by the Birch veneer layer. You’ll need to fill these holes prior to painting, or at least prior to sealing the edges of your finished project.
  • Also available in 1/8 inch thick double-sided sublimation hardboard for special projects!

Additional information

Weight 1 oz
Dimensions 3 × 3 × 0.3 in
Height/Length

8 inch, 10 inch, 12 inch, 18 inch, 20 inch, 22 inch, 24 inch

Options

Backing with Paint lines, Backing and dimensional lettering banners

Material types:

Please select a material type as part of ordering this product. MDF is (relatively) inexpensive and fairly easy to paint. Though it is known for being quite thirsty on the first coat. Priming is recommended.

You may also like…

You've just added this product to the cart:

error: Alert: Content is protected !!