Fleur de lis 4

0 out of 5

$0.49$8.99

-

The staple of crafters, this Fleur de lis 4 is “affectionately” called the “Muffin Top” ’round these parts, because it reminds me of something I’m trying to lose….  Laser cut from your choice of material, in sizes from 0.75 inch to 24 inches tall!

SKU: fleur-de-lis-4 Category: Tags: , , ,
Clear

Description

The staple of crafters, this Fleur de lis 4 is “affectionately” called the “Muffin Top” ’round these parts, because it reminds me of something I’m trying to lose….  Laser cut from your choice of material, in sizes from 0.75 inch to 24 inches tall!

Available material:

  • 1/4 inch Birch is used by a lot of folks. Grain may rise slightly and need sanding between coats of paint. Birch plywood occasionally contains “voids”–holes in the middle of the wood, that are covered on both front and back by the veneer layer. If one of these voids happens to be on the edge of your cutout, you’ll need to fill these holes prior to painting, or at least prior to sealing the edges of your finished project, so you don’t have problems sealing.
  • Rev Ply is 5 mm plywood. Rounds stain beautifully, although with a very straight grain. Read more about it here.
  • 1/8 inch Russian Birch plywood is a very thin plywood, with a more “normal,” wavy wood grain. You will recognize that anything with “Russian” in the name these days is getting VERY expensive. But we have it available (for now)!
  • MDF is (relatively) inexpensive but prices have been skyrocketing since covid. You may find it to be quite thirsty on the first coat of paint. Priming is recommended.
  • Also available in 1/8 inch thick double-sided sublimation hardboard, and clear acrylic, for special projects!

Additional information

Weight 1 oz
Dimensions N/A
Height/Length

0.75 inch, 2 inch, 4 inch, 6 inch, 8 inch, 10 inch, 12 inch, 18 inch, 20 inch, 22 inch, 24 inch