Dog Bone

0 out of 5

$0.49$8.99

This Dog bone can look good enough to chew on–guard your tree (or door)! Laser-cut, available in a variety of sizes and material types. the 4 inch size can be ordered optionally with an ornament hanging hole. (Not available on other sizes)

SKU: dog-bone Category: Tags: , , , ,
Clear

View cart
View cart

Description

This Dog bone can look good enough to chew on–guard your tree (or door)! Laser-cut, available in a variety of sizes and material types. the 4 inch size can be ordered optionally with an ornament hanging hole. (Not available on other sizes)

Available material:

  • MDF is (relatively) inexpensive and fairly easy to paint. Though you may find it to be quite thirsty on the first coat. Priming is recommended.
  • Rev Ply is 5 mm plywood. Rounds stain beautifully, although with a very straight grain. Read more about it here.
  • 1/8 inch Russian Birch plywood is a very thin plywood, with a more “normal,” wavy wood grain. You will recognize that anything with “Russian” in the name these days is getting VERY expensive. But we have it available (for now)!
  • 1/4 inch Birch is used by a lot of folks. Grain may rise slightly and need sanding between coats of paint. Birch plywood often contains “voids”–holes in the middle of the wood, that are covered on both front and back by the Birch veneer layer. If these happen to land on a cut edge, you’ll need to fill these holes prior to painting, or at least prior to sealing the edges of your finished project.
  • Also available in 1/8 inch thick double-sided sublimation hardboard for special projects!

Additional information

Weight N/A
Dimensions N/A
Height/Length

2 inch, 4 inch, 6 inch, 8 inch, 10 inch, 12 inch, 18 inch, 20 inch, 22 inch, 24 inch

Mounting Hole

no hole, Ornament hole

You've just added this product to the cart:

error: Alert: Content is protected !!